NSK

RHP MJ1.1/4NRJ

Item #
MJ1.1/4NRJ NSK
Request For Quote
RHP MJ1.1/4NRJ, Medium Deep Groove Ball Bearing, 1-1/4 in Dia Bore, 3-1/8 in OD, 1 Row, 7/8 in W, 37700 lb Dynamic/19600 lb Static Load

Request For Quote


Single-row deep groove ball bearings are the most common type of rolling bearings. Their use is very widespread. The raceway grooves on both the inner and outer rings have circular arcs of slightly larger radius than that of theballs. In addition to radial loads, axial loads can be imposed in either direction. Because of their low torque, they are highligh suitable for applications where high speeds and low power loss are required.

In addition to open type bearings, these bearings often have steel shields or rubber seals installed on one or both sides and are prelubricated with grease. Also, snap rings are sometimes used on the periphery. As to cages, pressed steel ones are the most common.

Important Documents

More Information
Manufacturer NSK
Ball Bearing Type Deep Groove Ball Bearing
Ball Rows 1 Row
Bore Diameter 31.75 mm
Outer Diameter 79.375 mm
Overall Width 22.225 mm
Search engine powered by ElasticSuite