Single-row deep groove ball bearings are the most common type of rolling bearings. Their use is very widespread. The raceway grooves on both the inner and outer rings have circular arcs of slightly larger radius than that of theballs. In addition to radial loads, axial loads can be imposed in either direction. Because of their low torque, they are highligh suitable for applications where high speeds and low power loss are required.
In addition to open type bearings, these bearings often have steel shields or rubber seals installed on one or both sides and are prelubricated with grease. Also, snap rings are sometimes used on the periphery. As to cages, pressed steel ones are the most common.
|Ball Bearing Type||Deep Groove Ball Bearing|
|Ball Rows||1 Row|
|Bore Diameter||50.8 mm|
|Outer Diameter||114.3 mm|
|Overall Width||26.988 mm|