HUC Bearing Inserts
Item #
HUC 209 28
Request For Quote
HUC Bearing Inserts
Request For Quote
IPTCI's high temperature bearing inserts are designed for applications up to 400° F (continuous), 450° F (intermittent). These special insert bearings can be used in any of our gray iron, plated, or stainless housings.
IPTCI's HUC inserts consist of the following:
IPTCI's HUC inserts consist of the following:
- Specially heat treated rings.
- C4 Internal Clearance - To accommodate thermal expansion.
- Silicone Rubber Seals - Offering excellent long term heat resistance.
- B-type seal configuration for wash down protection.
- High temperature, H-1 food grade grease with operating range of -45° F to +450° F.
- Black oxide finish, for additional corrosion resistance.
Important Documents
| Manufacturer Part # | HUC 209 28 |
|---|---|
| Inside Ring Width(in) | 1.937 |
| Measurement Type | Inch |
| Screw Distance(mm) | 8 |
| Seal Type | B-Type |
| Screw Distance(in) | 0.315 |
| Bore Size(in) | 1.75 |
| Inside Ring Width(mm) | 49.2 |
| Outer Ring(mm) | 49.2 |
|---|---|
| Static Load Capacity(lbf) | 4460 |
| Outer Ring(in) | 0.8661 |
| Overall Width(mm) | 49.2 |
| Overall Width(in) | 1.937 |
| Outside Diameter | 85 |
| Outside Diameter | 3.3465 |