RHP XLJ1.7/8JEP1 Extra Light Deep Groove Ball Bearing

Item #
Request For Quote
RHP XLJ1.7/8JEP1 Extra Light Deep Groove Ball Bearing, 1-7/8 in Dia Bore, 3-3/16 in OD, 1 Row, 5/8 in W, 22700 lb Dynamic/16600 lb Static Load

Request For Quote

Single-row deep groove ball bearings are the most common type of rolling bearings. Their use is very widespread. The raceway grooves on both the inner and outer rings have circular arcs of slightly larger radius than that of theballs. In addition to radial loads, axial loads can be imposed in either direction. Because of their low torque, they are highligh suitable for applications where high speeds and low power loss are required.

In addition to open type bearings, these bearings often have steel shields or rubber seals installed on one or both sides and are prelubricated with grease. Also, snap rings are sometimes used on the periphery. As to cages, pressed steel ones are the most common.

Important Documents

More Information
Manufacturer RHP
Ball Bearing Type Deep Groove Ball Bearing
Ball Rows 1 Row
Bore Diameter 47.625 mm
Outer Diameter 80.955 mm
Search engine powered by ElasticSuite