RHP

RHP XLJ2JEP1 Extra Light Deep Groove Ball Bearing

Item #
XLJ2JEP1 NSK
Request For Quote
RHP XLJ2JEP1 Extra Light Deep Groove Ball Bearing, 2 in Dia Bore, 3-5/16 in OD, 1 Row, 5/8 in W, 22700 lb Dynamic/16600 lb Static Load

Request For Quote


Single-row deep groove ball bearings are the most common type of rolling bearings. Their use is very widespread. The raceway grooves on both the inner and outer rings have circular arcs of slightly larger radius than that of theballs. In addition to radial loads, axial loads can be imposed in either direction. Because of their low torque, they are highligh suitable for applications where high speeds and low power loss are required.

In addition to open type bearings, these bearings often have steel shields or rubber seals installed on one or both sides and are prelubricated with grease. Also, snap rings are sometimes used on the periphery. As to cages, pressed steel ones are the most common.

Important Documents

More Information
Manufacturer RHP
Ball Bearing Type Deep Groove Ball Bearing
Ball Rows 1 Row
Bore Diameter 50.8 mm
Outer Diameter 84.131 mm
Search engine powered by ElasticSuite