RHP

RHP XLJ4.1/4JEP1 Extra Light Deep Groove Ball Bearing

Item #
XLJ4.1/4JEP1 NSK
Request For Quote
RHP XLJ4.1/4JEP1 Extra Light Deep Groove Ball Bearing, 4-1/4 in Dia Bore, 6 in OD, 1 Row, 7/8 in W, 48400 lb Dynamic/48800 lb Static Load

Request For Quote


Single-row deep groove ball bearings are the most common type of rolling bearings. Their use is very widespread. The raceway grooves on both the inner and outer rings have circular arcs of slightly larger radius than that of theballs. In addition to radial loads, axial loads can be imposed in either direction. Because of their low torque, they are highligh suitable for applications where high speeds and low power loss are required.

In addition to open type bearings, these bearings often have steel shields or rubber seals installed on one or both sides and are prelubricated with grease. Also, snap rings are sometimes used on the periphery. As to cages, pressed steel ones are the most common.

Important Documents

More Information
Business vs Brand RHP
Ball Bearing Type Deep Groove Ball Bearing
Ball Rows 1 Row
Bore Diameter 107.95 mm
Outer Diameter 152.4 mm
Search engine powered by ElasticSuite